Software
Home Feedback Ilec (Deutsch)

 

Up

ILEC SN10 Software Version 2.36, April 2011

Download SN-10 demo program which includes an animated illustration of the GPS wind page (not for 64-bit Windows).

The downloads below include both software utilities that run on your PC (such as PC-Link and the Software-Load utilities), and the updates to the actual SN10 software in your glider. To prepare your PC for use with an SN10:
(1) Download the appropriate installer below to your PC,
(2) Run the installer program on your PC.
Please make sure to download the correct version (SN10B versus original SN10) of the software!

Please install this software into your PC's C:\SN10 folder. Its OK to install both SN10 and SN10B software in this folder.

If you accidentally load the SN10B software into an SN10 (or the SN10 software into an SN10B):

  • your SN10 screen will be blank
  • your SN10 will sound an audio SOS (dot-dot-dot-dash-dash-dash-dot-dot-dot)
  • you will need to load the correct software before you can use the SN10
Notable features of version 2.36 (30-April-2010): **********************
- Includes IGC-style flight-log validation DLL IGC-IEC.DLL
- Includes latest (August 2010) USB-adapter HEX file ILECUSBA.HEX
  Update your USB adapter software to get these improvements:
  - ignore DOS ctrl-Z characters
  - only one message if you use a memory stick needing too much power
- FLARM improvements:
  - Auto-Clears FLARM collision warning page when the threat disappears
  - Echo FLARM errors to SN10 screen
  - Suppress spurious "FLARM configuration" warnings during flight
- DBC reports extremities of points in area (in -v verbose mode)
- Add VALIEC32 32-bit SN10 flight-record file-validation program
Notable features of version 2.35 (11-March-2010): **********************
- New FLARM support (enable on "SN10 Options 2" page):
  - FLARM collision warning page (pops up graphic for collision warning)
  - FLARM neighbors moving map display page
  - declare SN10 task into FLARM
- AAT workload reduction features. On the moving map page, ONLY when in
  AAT mode (switch to "A"), and ONLY when the cursor is on one of the
  four control fields at lower left:
    (1) Extended HELP shows stats for the remaining task,
    so there's no page switching to see how an adjustment affects
    the ETF and amount over and under. Press HELP on any of
    the four control fields at lower left, and you'll see this:
    == Task To Go ==
    Distance   203.0
    current MC   2.0
    Altitude---7,004
    ==== Times =====
    ETF         2:07
    Remaining   1:46
    +++++++++++++:21
    (2) With the cursor on one of the four control fields at lower left,
    press ENTER to snap the next AAT turnpoint to the point
    - on the current courseline (from leg start through your location),
    - half way from your current location to the back of AAT area
    If this would result in a point not in the area it just beeps.
    After snapping the TP, the task is recomputed and the stats
    message above is automatically displayed.
- Add Discus 2c 18-meter polar
- Formatting improvements (leading ":" on minutes time in many locations)
- Bugfix: Start and Finish lines (and sectors) stay oriented w/respect
  to the nominal AAT area centers, not the dragged turnpoint location...
- Bugfix: ENTER on the scroll arrows while  in AAT-drag mode does not
  re-center map; now it snaps the turnpoint location as above
- DBparse bugfix (for USB adapter only, does not affect SN10 software)
- NOTE: FP traps enabled for 2.35 production release

Notable features of version 2.34 (21-September-2009): ******************
- Dark LCD bug fixed (temperature-contrast adjust bug of Jan 2009)
- USB adapter bug fixes and improvements (progress messages etc)
- Suppress diagnostics which could interfere with PDA/FLARM (USB, NSP)
- DBC/DBC32 and PClink NDB checkers now flag duplicate-name turnpoints
  Note: Duplicates are NOT currently flagged when NDB loaded into SN10

Notable features of version 2.33 (29-June-2009): ***********************
- USB-adapter support for log file save, NDB file load, and SN10 software load
- Now supports up to 6 AAT areas
- NMEA baud rate selectable (4800 or 19200) for FLARM/PDA support
- 19.2kb NMEA support in SL (software load) and PClink
- "Software Load..." on screen during software update
- Many optimizations for speed and code-size (room for next feature)
- BugFix: serial port now properly initialized on cold-start
- Prevent accidental creation of database points with blank names
- Memory map changes for diagnostics (OS stack pool at fixed location)